Cuisinart EM-600 Manuale di Manutenzione e Cura Scaricare il pdf (Pagina 9)

r 5PSFNPWFUIFTUFBNGSPUIJOHXBOEQPTJUJPO

it pointing straight down, then rotate

counterclockwise and pull straight out.

To replace, position steam/frothing wand

pointing up and rotate clockwise.

t It is not recommended to leave milk

unrefrigerated for longer than 1 hour. Be sure

to clean the milk tank regularly. See Cleaning

The Milk Tank on page 9.

CAPPUCCINO OR LATTE

1. Using the lever, open the brew head, insert a

capsule, and close the brew head.

2. Be sure there is milk in the

milk tank and tank is

properly installed (see

Steam/Frothing section).

3. Place a cup on the drip

tray, and position the

steam/frothing wand in

the cup.

4. Use the steam control dial

on the milk tank cover to

select the amount of air/

froth you want.

NOTE: It is recommended to

use more froth

for

cappuccino and latte. If you prefer less froth,

use the

setting on the dial.

5. Press either the CAPPUCCINO or

LATTE

button.

6. The frothed milk will be dispensed into the

cup, followed by

Cuisinart’s patented Burst

of Steam feature that

quickly cleans the steam/

frothing wand. Espresso

is then immediately dispensed.

Tips for creating a perfect froth:

Milk frothing is the steaming of milk. The

steam does two things; it heats milk and it

mixes in air to form a foamy texture. As with

anything, perfecting the art of milk texturing

takes practice, but the results are well worth it!

Use cold, refrigerated milk in the milk tank. Any

type of milk may be used, but for best results,

skim is recommended. Keep in mind that the

milk volume will increase during frothing, so use

a large enough cup.

NOTE: If the milk tank is not installed or placed

in the unit correctly, the CAPPUCCINO

,

LATTE

, and STEAM LEDs will not light.

Only lit LEDs are available functions.

TEMPERATURE

CONTROLS

Extra-Hot

is the default setting. If hot is

desired, press and hold the

button for 3

seconds to allow the temperature to decrease.

The flashing light will turn off when it has

reached the lower temperature.

ENERGY SAVER MODE

After 30 minutes of non-use the espresso

machine will automatically switch to sleep

mode and all the control lights will be dimmed

by about 50%. When any button is pressed,

the espresso machine will return to preheat

mode and all the lights will flash. The machine

is ready to operate when all the lights are

steady again.

AUTO-OFF MODE

Following the 30-minute

Energy Saver cycle, if

there is an additional 30

minutes of non-use, the

espresso machine will

turn off. Press the power

button to turn on again.

CLEANING AND

MAINTENANCE

Cleaning Used Capsule Container

Container holds approximately 10 capsules and

some residual liquid after brewing. Be sure to

empty the container of any used capsules

periodically. The container is top-shelf

dishwasher safe and may also be cleaned with

warm soapy water.

Cleaning External Parts

We recommend regular cleaning of the

espresso maker’s external components.

Cleaning the Housing

Never immerse the machine in water or other

8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Commenti su questo manuale

Nessun commento